fits model: Sx, 300, 650. make: Kawasaki. year: 1987-91–1987-93.

( Brand: Componentsplus ), ( Part Type: Ring Jet ), ( Warranty: 1 Year ), ( California Prop 65 Warning: This Product May Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov ), ( Country Of Origin: Us ), ( Ipn: 920553706 ), ( Product Notice: As A Parts Distributor We Mostly Sell Aftermarket Parts ), ( Source: Aftermarket ), ( UPC: 680175672280 )
Introducing the Components Plus 680175672280 Nose Cone O-Ring, specifically designed for Kawasaki Jet Ski models SX 300 (1987-1991) and 650 (1987-1993), as well as 92055-3706. This essential component is an integral part of the watercraft's sealing system, ensuring a watertight connection between the nose cone and hull.
The Nose Cone O-Ring is meticulously crafted from high-quality, durable rubber material. Its cross-section design provides excellent sealing capabilities, preventing water from entering the jet ski through the nose cone area. The O-Ring's flexible nature allows it to adapt to the contours of the nose cone and hull, ensuring a snug and secure fit.
The Components Plus Nose Cone O-Ring is designed with precision, ensuring a perfect fit for the specified Kawasaki Jet Ski models. The O-Ring's dimensions are carefully measured to provide an optimal seal, enhancing the overall performance and longevity of the watercraft.
Installing the Nose Cone O-Ring is a straightforward process. Simply remove the old O-Ring, clean the surface, and apply a generous amount of silicone sealant or adhesive. Slide the new O-Ring into place, ensuring it is properly seated, and allow the sealant or adhesive to cure before reassembling the nose cone and hull.
The Components Plus 680175672280 Nose Cone O-Ring is an essential upgrade for any Kawasaki Jet Ski owner seeking to maintain the optimal performance and longevity of their watercraft. Its high-quality design and materials ensure a reliable seal, preventing water intrusion and protecting the engine and electrical components from damaging effects of water.
In summary, the Components Plus 680175672280 Nose Cone O-Ring is a vital replacement part for Kawasaki Jet Ski models SX 300 (1987-1991), 650 (1987-1993), and 92055-3706. Its high-quality rubber material, precise dimensions, and straightforward installation process make it an essential upgrade for any watercraft enthusiast looking to ensure their Jet Ski's continued performance and longevity.
The Nose Cone O-Ring (Part Number: 055-3706) is an essential component for Kawasaki Jet Ski owners with models SX 300, 650, and 900 from the years 1987 to 1993. In this analysis, we will discuss the advantages, disadvantages, and provide a final recommendation.
Pros:1. Essential component: The nose cone O-ring is a critical part for sealing the watercraft's nose cone and preventing water leakage.
2. Durability: The O-ring is designed to withstand the harsh marine environment, ensuring a long service life.
3. Easy installation: The O-ring can be replaced relatively easily, allowing for quick repairs and maintenance.
4. Improves performance: A properly sealed nose cone can help improve overall jet ski performance by reducing water drag and increasing efficiency.
5. Affordable: Compared to other repairs or upgrades, the cost of a nose cone O-ring is relatively low.
Cons:1. Wear and tear: The O-ring is subjected to continuous exposure to water, sunlight, and other environmental factors, which can lead to wear and tear over time.
2. Availability: Finding a genuine replacement O-ring can be challenging, as they may not be readily available at local parts stores or through Kawasaki dealerships.
3. DIY installation challenges: Although the installation process is relatively straightforward, some users may find it challenging to remove the old O-ring without damaging it or the surrounding components.
4. Potential for water intrusion: If the O-ring is not installed correctly or is damaged, water can enter the jet ski, potentially causing more significant and costly issues.
Conclusion:The Nose Cone O-Ring (055-3706) is a crucial component for maintaining the performance and seaworthiness of Kawasaki Jet Ski models SX 300, 650, and 900 from the years 1987 to 1993. While the O-ring has some disadvantages, such as wear and tear and potential availability issues, the benefits, including durability, easy installation, and affordability, outweigh the cons.
Recommendation:We recommend that Kawasaki Jet Ski owners of the mentioned models periodically inspect their nose cone O-rings and replace them as needed. By doing so, they can prevent potential water intrusion, maintain optimal performance, and ensure the longevity of their watercraft. If you're unsure about the installation process or have trouble obtaining the part, consider seeking assistance from a professional mechanic or Kawasaki dealership.
NEW NOSE CONE O-RING FITS KAWASAKI JET SKI SX 300 1987 91 650 1987 93 92055-3706: 1986 -1988, 1987 - 1991, SC 1991 - 1995, 1987 - 1993, gifts 1989 - 1996, X2 1986 - 1995, SS 750 1992 - 1997, SSXI 1993 - 1997, ST 1994 - 1995, STS 1995 - 1997, STX 1998, 1992 - 1995, SXI 1995 - 1996, PRO 1998 -2002, XI SPORT 1998 -1999, XIR 1994, ZXI SX-R 800 2003 -2011, 900 1100 1997 -1999, 1996 - 2003. FITS / Replacement Part Numbers: KAWASAKI: 92055-3706 92055-1485 920553706 920551485,: NOSE CONE O-RING, UNIT TYPE: KAWASAKI. ComponentsPlus products, when properly installed, are warranted against defects in materials and workmanship to the original purchaser for a period of one 1 year from date purchase. Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but designed to function same as - if better than.
Warranty does not cover failure due to accident, abuse, neglect or as the result of normal wear and tear. All parts sold are new. Product Notice: As a parts distributor we mostly sell aftermarket any OEM would be noted as such.